How to correctly install the robot?
Updated on 2025/04/29
1.Please take out the Robot, base，station，power cord from the packaging box and peel off protective tape and collision strip.
2.Turn the Robot over.
3.Insert the side brush into the slot and press until a "click" confirms secure attachment.
4.Install the base, press both sides, the "click" sound heard indicates that the installation is in place;
5.Connect the power cord to the power socket on the back, turn on the power, and find a suitable position to place it against the wall.
(Please place the Robot on a flat, hard surface, without any objects within 5cm on both sides and 80cm in front of it.)
Warm Reminder：
Robot should be placed on ceramic tile floors as a priority. If you need to place them on wooden floor, please check the bottom of the Robot regularly for any water stains, and clean them promptly to prevent moisture damage.
2.Turn the Robot over.
3.Insert the side brush into the slot and press until a "click" confirms secure attachment.
4.Install the base, press both sides, the "click" sound heard indicates that the installation is in place;
5.Connect the power cord to the power socket on the back, turn on the power, and find a suitable position to place it against the wall.
(Please place the Robot on a flat, hard surface, without any objects within 5cm on both sides and 80cm in front of it.)
Warm Reminder：
Robot should be placed on ceramic tile floors as a priority. If you need to place them on wooden floor, please check the bottom of the Robot regularly for any water stains, and clean them promptly to prevent moisture damage.