Disassemble, Clean & Install the Filter Basket
Updated on 2026/03/12
When you find dirt in the filter basket or notice that the cleaning effect is not satisfactory, you can try disassembling and cleaning the filter basket by following these steps:
1.Press the button on the front of the robot to open the filter basket cover and remove the filter basket assembly.
2.Empty the debris from the filter basket.
3.If the 3 μm filter is installed, remove it, then thoroughly rinse the inner and outer filter baskets separaterly.
4.After cleaning, make sure to air-dry the filter mesh and filter basket before placing them back into the pool robot.
Note:
1.It is recommended to clean the filter basket after each use.
2.It is recommended to replace the filter basket every three months to ensure proper operation. For the 3μm filter mesh, it is recommended to replace it after 30 uses to ensure optimal filtering performance."
1.Press the button on the front of the robot to open the filter basket cover and remove the filter basket assembly.
2.Empty the debris from the filter basket.
3.If the 3 μm filter is installed, remove it, then thoroughly rinse the inner and outer filter baskets separaterly.
4.After cleaning, make sure to air-dry the filter mesh and filter basket before placing them back into the pool robot.
Note:
1.It is recommended to clean the filter basket after each use.
2.It is recommended to replace the filter basket every three months to ensure proper operation. For the 3μm filter mesh, it is recommended to replace it after 30 uses to ensure optimal filtering performance."