How to install the trimmer module?
Updated on 2026/01/28
(1) The trimmer module requires three screws: two are included in the spare parts kit, and one is pre-installed within the module.
(2) Use a PH2 Phillips screwdriver >10cm in length.
(3) If aligning screws is difficult, observe the screwdriver angle from the underside of the trimmer module to align screws quickly.
(2) Use a PH2 Phillips screwdriver >10cm in length.
(3) If aligning screws is difficult, observe the screwdriver angle from the underside of the trimmer module to align screws quickly.