Robot Map Creation

I. Preparing for Map Creation
1. Open doors, clear floor obstructions, and ensure adequate lighting to enable full coverage of the home environment;
2. Lift the cover of the ROBOT, slide the Power Switch to "I" to turn it on, and place it directly in front of the station;
3. Press and hold the "auto" button on the ROBOT to initiate autonomous return to the charging dock. Charging will commence upon successful docking.
II: Quick Mapping
Note: Ensure your robot is connected to the network and online.
1. Using the App
Open ECOVACS HOME > Enter> Quick Mapping.
2. Upon completion, the robot will announce: "Mapping complete. View in the app." The map has been successfully created.
Note:
① You can also press the robot's "Start Button" to initiate mapping. The robot will start quick mapping, then start whole house cleaning.
② If you edit the map, you must manually back up the map afterward.
Friendly reminder:
1. Do not follow or move the robot during mapping.
2. Do not move the station after mapping is complete.