Robot Installation Guidelines
Updated on 2025/09/19
1.Unpack the robot, base, station, and power cord. Remove the robot’s protective strip and the station’s plastic cover.
2.Install the base by pressing both sides until it clicks into place.
3.Connect the power cord to the back of the station, place it against a wall, and power it on. (For the US version, turn on the switch at the back first.)
Tip: Place the station on a hard, flat surface. Keep 5 cm clear on both sides and 80 cm at the front.
Kind Reminder:
1.Use on tiled floors for best results. If on wood, check for moisture underneath.
2.Install the base properly.
3.Cover the bottom 14 cm of nearby mirrors or reflective surfaces.
4. Avoid direct sunlight.
5.Ensure strong Wi-Fi signal nearby.
2.Install the base by pressing both sides until it clicks into place.
3.Connect the power cord to the back of the station, place it against a wall, and power it on. (For the US version, turn on the switch at the back first.)
Tip: Place the station on a hard, flat surface. Keep 5 cm clear on both sides and 80 cm at the front.
Kind Reminder:
1.Use on tiled floors for best results. If on wood, check for moisture underneath.
2.Install the base properly.
3.Cover the bottom 14 cm of nearby mirrors or reflective surfaces.
4. Avoid direct sunlight.
5.Ensure strong Wi-Fi signal nearby.