Disassembly, clean and installation guide of main brush
Updated on 2025/03/14
Warm Reminder：
When your robot has been used for a period of time, if you hear a sound similar to the clicking sound when cleaning or prompting the brush to be entangled, or there is dust left in the dust bin and so on, you can follow the steps below to try:
1.Open the top cover, flip the power switch to "O", turn the Robot over;
2.Remove the brush cover and take out the main brush;
3.Clean the tangled material off the main brush;
4.Reinstall the main brush, and confirm that it can rotate smoothly;
5.Align the brush cover with the machine slot and install it. When you hear a "click", it indicates that it is properly installed.
When your robot has been used for a period of time, if you hear a sound similar to the clicking sound when cleaning or prompting the brush to be entangled, or there is dust left in the dust bin and so on, you can follow the steps below to try:
1.Open the top cover, flip the power switch to "O", turn the Robot over;
2.Remove the brush cover and take out the main brush;
3.Clean the tangled material off the main brush;
4.Reinstall the main brush, and confirm that it can rotate smoothly;
5.Align the brush cover with the machine slot and install it. When you hear a "click", it indicates that it is properly installed.