Offline troubleshooting:

1.    The robot was powered off or not switched on or low battery power； 

2.     Wi-Fi router failure, and Internet connection doesn’t work.

3.     When the robot is in the clean process, it cannot return to charging dock stuck by barriers, it will power off automatically. This is to protect the battery from over discharging. 

4.     If the robot is moved off from charging dock by external power, and not well connected with the charging dock, it will power off automatically. This is to protect the battery from over discharging. 

5.     Please check the robot location, it will be “offline” if not covered by the Wi-Fi network or bad Wi-Fi signal.

6.     Wi-Fi router issues like:  the Wi-Fi network name/password was changed but you didn’t go through the connection process again.  Or after the connection completes, you change some settings of the Wi-Fi router, e.g., to hide Wi-Fi network; or add security setting, e.g., set fixed IP, MAC address filter etc.

Frequent “Offline” and Multiple routers and Mesh network Troubleshooting

1、  If you have more than one routers (with different SSID names & passwords) at home,, you have to make the robot connection to each Wi-Fi router one by one; only after that, can the robot move from one area to another area through Wi-Fi network roaming., Do be aware there’ll be a very short offline period during the roaming process)

2、  If you have a Mesh structure (Wi-Fi router extenders), please turn off the extenders and make the connection directly with the Wi-Fi router. After the connection process is  successfully completed, you can turn back on the extenders, and then your robot can move to the areas which has network signal covered by the extenders.

3、  If your home network is a cascaded network (the Hub LAN port or Switch links to router’s WAN port), if network SSID name & password are the same as the Hub, and your smart phone can only find one network SSID name, you may make Robot connection through any one of the routers (if you have more than one routers). The Robot can work in the routers’ coverage area. Do note there will be a short offline period during the roaming. 

4、  If the multiple routers are connected by sequential cascading (the uplink’s LAN port connects to downlink’s WAN port), or by wireless bridging, and all routers have different network SSID names and passwords, this situation is much like the scenario 1, i.e., you should make the connection to all the routers, ensuring the robot can work in the coverage area with minimum offline time.  If all the routers have the same network SSID names and passwords, and your smart phone can only find one network SSID name, you just only need to make the connection with one of the routers, and the robot can connect to all other routers during the roaming. Do note there will be a short offline period during the roaming. 

The robot is offline after you replace a Wi-Fi router

1、  If the new Wi-Fi router has the same network name (SSID) and password to the previous router, the robot can connect to the new router automatically. You can check the Wi-Fi LED light if it’s steady on.

2、  If the Wi-Fi LED light is flashing (meaning it is NOT connected to the Wi-Fi),  you have to repeat the connection process above.

Re-set to the original factory default setting to change App account

1、  Press the reset button (for around 10 seconds), the robot will reset and power on, with the Wi-Fi LED light flashing

2、  GO through the connection process till it is completed.

Rates from 0–36% APR. Payment options through Affirm are subject to an eligibility check and are provided by these lending partners: affirm.com/lenders. Options depend on your purchase amount, and a down payment may be required. CA residents: Loans by Affirm Loan Services, LLC are made or arranged pursuant to a California Finance Lenders Law license. For licenses and disclosures, see affirm.com/licenses. For example, a $800 purchase could be split into 12 monthly payments of $72.21 at 15% APR or 4 interest free payments of $200 every 2 weeks.