Auto-emptying failed, no dust bag detected or the dust bag is full.
Updated on 2023/02/17
1. Make sure that the dust bag is fitted correctly and that the dust collection cabin is closed properly.
2. Make sure that DEEBOT is correctly placed on the docking station.
3. If the dust collection cabin at the docking station contains a dust bag, please remove the dust bag. Restart DEEBOT and place it on the docking station correctly again. Disconnect the power supply to the docking station and then reconnect the power supply. Check the firmware version of the robot and keep it up to date.
4. Make sure that DEEBOT is charging. Reinstall the dust bag before use.
2. Make sure that DEEBOT is correctly placed on the docking station.
3. If the dust collection cabin at the docking station contains a dust bag, please remove the dust bag. Restart DEEBOT and place it on the docking station correctly again. Disconnect the power supply to the docking station and then reconnect the power supply. Check the firmware version of the robot and keep it up to date.
4. Make sure that DEEBOT is charging. Reinstall the dust bag before use.