Why is the GOAT missing some areas when mowing?
Oppdateringdato 2025/02/21
(1) Please check whether there are temporary obstacles blocking the route of the GOAT. Areas smaller than 1 m in diameter blocked by temporary obstacles will not be mowed by the GOAT.
(2) Please check whether AI recognition is turned on in the app. These may occasionally result in false obstacle avoidances.
(3) Please check whether the obstacle avoidance height you set in the App is too low. Lower obstacle avoidance heights may result in missed areas.
(4)The GOAT can clear obstacles with a height of up to 3 cm (based on laboratory data). Steps or roads with a greater height are inaccessible to the GOAT.
(5) The GOAT is unable to mow grass higher than 12 cm. Higher grass may be recognized as an obstacle, so please make sure that grass has been trimmed to lower than 10 cm.
(6) The GOAT is unable to climb slopes with an inclination of greater than 24°(45%). It is recommended to set up physical enclosures (height greater than 20cm) for these slopes.
(7) Please check whether there are passages narrower than 0.7 m on the map (including narrow areas surrounded by map boundaries and No-Entry zones or between No-Entry zones). Currently, the GOAT will mow passages narrower than 0.7 m only once.
If an area is missed due to temporary obstacles, it will be mowed next time after the obstacle has been removed. You can also use the App to manually control the GOAT and mow the missed areas
(2) Please check whether AI recognition is turned on in the app. These may occasionally result in false obstacle avoidances.
(3) Please check whether the obstacle avoidance height you set in the App is too low. Lower obstacle avoidance heights may result in missed areas.
(4)The GOAT can clear obstacles with a height of up to 3 cm (based on laboratory data). Steps or roads with a greater height are inaccessible to the GOAT.
(5) The GOAT is unable to mow grass higher than 12 cm. Higher grass may be recognized as an obstacle, so please make sure that grass has been trimmed to lower than 10 cm.
(6) The GOAT is unable to climb slopes with an inclination of greater than 24°(45%). It is recommended to set up physical enclosures (height greater than 20cm) for these slopes.
(7) Please check whether there are passages narrower than 0.7 m on the map (including narrow areas surrounded by map boundaries and No-Entry zones or between No-Entry zones). Currently, the GOAT will mow passages narrower than 0.7 m only once.
If an area is missed due to temporary obstacles, it will be mowed next time after the obstacle has been removed. You can also use the App to manually control the GOAT and mow the missed areas