How to correctly install the robot?
Bijgewerkt op 2025/07/02
1.Please open the outer packaging and take out the items，base, power cord, Robot, side brush, station. Remove the adhesive tape from the station, and the anti-collision protective strips from the Robot.
2.Turn the Robot over.
3.Align the side brush with the slot, press it down. A "click" sound indicates that it has been installed properly.
4.Install the base, press both sides, the "click" sound heard indicates that the installation is in place;
5.Take out the power cord, connect it to the power socket on the back, turn on the power, and find a suitable position to place it against the wall.
(Please place the Robot on a flat, hard surface, without any objects within 5cm on both sides and 80cm in front of it.)
6.Take out the integrated water tank, open the tank cap, and fill it with water up to the recommended water level line. After filling, tightly close the tank cap and reinstall the water tank back into the station.
Warm Reminder：
Robot should be placed on ceramic tile floors as a priority. If you need to place them on wooden floor, please check the bottom of the Robot regularly for any water stains, and clean them promptly to prevent moisture damage.
2.Turn the Robot over.
3.Align the side brush with the slot, press it down. A "click" sound indicates that it has been installed properly.
4.Install the base, press both sides, the "click" sound heard indicates that the installation is in place;
5.Take out the power cord, connect it to the power socket on the back, turn on the power, and find a suitable position to place it against the wall.
(Please place the Robot on a flat, hard surface, without any objects within 5cm on both sides and 80cm in front of it.)
6.Take out the integrated water tank, open the tank cap, and fill it with water up to the recommended water level line. After filling, tightly close the tank cap and reinstall the water tank back into the station.
Warm Reminder：
Robot should be placed on ceramic tile floors as a priority. If you need to place them on wooden floor, please check the bottom of the Robot regularly for any water stains, and clean them promptly to prevent moisture damage.