How to handle it when the mop is dry after cleaning or there is no clean water flowing out from the station?
Bijgewerkt op 2025/07/02
1.After removing the integrated water tank, check if any foreign objects are stuck. If so, clean them and put it back, ensure it is placed evenly and securely.
2.Please make sure that the sealing plug for the clean water tank is properly installed and fits tightly.
3.Check the inside of the clean water tank for any dirt. If there is dirt, open the side water tank plug, add an appropriate amount of clean water multiple times, shake it vigorously to clean, and then pour it out. After cleaning, reinstall it.
4.After completing the above steps, you can place the Robot at the station for docking. Press and hold the recharge button to activate the self-cleaning and observe if the clean water can flow out normally. If it does not work, please contact after-sales customer service for assistance.
2.Please make sure that the sealing plug for the clean water tank is properly installed and fits tightly.
3.Check the inside of the clean water tank for any dirt. If there is dirt, open the side water tank plug, add an appropriate amount of clean water multiple times, shake it vigorously to clean, and then pour it out. After cleaning, reinstall it.
4.After completing the above steps, you can place the Robot at the station for docking. Press and hold the recharge button to activate the self-cleaning and observe if the clean water can flow out normally. If it does not work, please contact after-sales customer service for assistance.