How to maintain/clean the brushes?
Updated on 2026/07/20
1. Ensure the fan is off (Long press the Start button to stop the fan).
2. Flip the WINBOT over with the cleaning pad facing up.
3. Simultaneously press the bumpers on both sides of the brushes. Release after the voice prompt: "Brushes have been released. Please remove the brushes, wash and dry them thoroughly, then reinstall."
4. Pinch the brush and pull it upwards to remove.
5. Wash the brushes with water and dry them thoroughly before reinstalling.
6. Reinstall the brush until you hear a "click" to ensure it is secure.
Tip: The mechanism retracts after 1 minute. Please clean and reinstall all four brushes at the same time.
2. Flip the WINBOT over with the cleaning pad facing up.
3. Simultaneously press the bumpers on both sides of the brushes. Release after the voice prompt: "Brushes have been released. Please remove the brushes, wash and dry them thoroughly, then reinstall."
4. Pinch the brush and pull it upwards to remove.
5. Wash the brushes with water and dry them thoroughly before reinstalling.
6. Reinstall the brush until you hear a "click" to ensure it is secure.
Tip: The mechanism retracts after 1 minute. Please clean and reinstall all four brushes at the same time.