Glass surfaces incompatible with WINBOT
Updated on 2026/07/20
To avoid the risk of falling or entrapment, do not use WINBOT on glass surfaces with the following characteristics:
1. Uneven surfaces with stickers, damage, gaps, patterns, or textures.
2. Micro-obstacles less than 2mm high, or railings/barriers nearby that are lower than 77mm.
3. Surfaces where the distance between a gap and an obstacle is within 40cm.
4. Shower doors or windows with rubber seals (which may cause the robot to get stuck or dislodge the seal).
5. For windows with handles or hinges, ensure the robot starts at least 10cm away from these obstacles.
1. Uneven surfaces with stickers, damage, gaps, patterns, or textures.
2. Micro-obstacles less than 2mm high, or railings/barriers nearby that are lower than 77mm.
3. Surfaces where the distance between a gap and an obstacle is within 40cm.
4. Shower doors or windows with rubber seals (which may cause the robot to get stuck or dislodge the seal).
5. For windows with handles or hinges, ensure the robot starts at least 10cm away from these obstacles.