Why does the Safety Pod Status Indicator Light glow a continuous RED?
Updated on 2020/03/06
1. The Safety Pod is not paired with WINBOT. Within the first 5 seconds of powering ON WINBOT, press and hold the START/PAUSE Button on WINBOT and the Pairing Button on the Safety Pod at the same time. Pairing is complete when the Safety Pod Status Indicator Light blinks RED and GREEN and it emits a beep.
2. The Safety Pod is losing its suction.
A. Press and hold the Safety Pod firmly for 5 seconds. If the Safety Pod Status Indicator Light glows a continuous GREEN it is secure.
B. If solution A doesn't work, take the Safety Pod off the window and use the Finishing Cloth to wipe it clean, then repeat Solution A.
3. The Safety Pod is in Standby Mode. Power OFF the Safety Pod then power it ON again.
4. The Safety Pod Jack is not connected correctly.
5. The Safety Pod Port on WINBOT is not properly connected. Insert the Safety Pod Jack into the port again.
2. The Safety Pod is losing its suction.
A. Press and hold the Safety Pod firmly for 5 seconds. If the Safety Pod Status Indicator Light glows a continuous GREEN it is secure.
B. If solution A doesn't work, take the Safety Pod off the window and use the Finishing Cloth to wipe it clean, then repeat Solution A.
3. The Safety Pod is in Standby Mode. Power OFF the Safety Pod then power it ON again.
4. The Safety Pod Jack is not connected correctly.
5. The Safety Pod Port on WINBOT is not properly connected. Insert the Safety Pod Jack into the port again.