Why does WINBOT beep three times and the Safety Pod Status Indicator Light glow RED continuously after attaching WINBOT to the window?
Updated on 2020/03/06
1. Before using, please pair the Safety Pod with WINBOT. Within the first 5 seconds of powering ON WINBOT, press and hold the START/PAUSE Button on WINBOT and the Pairing Button on the Safety Pod at the same time. Pairing is complete when the Safety Pod Status Indicator Light blinks RED and GREEN and it emits a beep.
2. Relocate the Safety Pod to make sure the Safety Pod has enough suction power. The area the Safety Pod is attached to should be clean. Safety Pod Status Indicator Light glows a continuous GREEN within 5 seconds if you attach the Safety Pod firmly.
3. Re-insert the Safety Pod Jack into the port.
4. If you connect the Safety Pod correctly, WINBOT will beep and the Safety Pod Status Indicator Light glows GREEN. After three seconds, the Fan Motor will start. Now you can attach WINBOT. After attaching WINBOT, its Status Indicator Light will turn BLUE and WINBOT will start.
2. Relocate the Safety Pod to make sure the Safety Pod has enough suction power. The area the Safety Pod is attached to should be clean. Safety Pod Status Indicator Light glows a continuous GREEN within 5 seconds if you attach the Safety Pod firmly.
3. Re-insert the Safety Pod Jack into the port.
4. If you connect the Safety Pod correctly, WINBOT will beep and the Safety Pod Status Indicator Light glows GREEN. After three seconds, the Fan Motor will start. Now you can attach WINBOT. After attaching WINBOT, its Status Indicator Light will turn BLUE and WINBOT will start.