Installation and Use Guidance
Updated on 2026/07/20
1. Open the box, take out the product and accessories. Remove all protective films and strips.
2. Read the instruction manual and safety precautions carefully before use.
3. Open the water tank plug on top. Add ECOVACS WINBOT cleaning solution and close the plug tightly.
Tip: Monitor the liquid level to avoid overflow.
4. Open the station's back cover, take out the power cord, and plug it in. Long press the Power button for over 2 seconds to turn on the station and WINBOT.
Tip: If the blue light flashes, charge the WINBOT until the light stays solid before use.
5. Dampen the wiping pad and wring it out. Align the wide and narrow edges, attach it to the velcro, and press it flat.
6. For safety, secure the safety rope to a stable object. Lock the carabiner to prevent accidents.
7. Manually wipe a small area of the window larger than the WINBOT before adhering the unit.
8. Hold Start Button for 2 seconds.Once the fan starts, place WINBOT on the glass, and then automatically adsorb and start the cleaning.
Points to note:
1) WINBOT can only use on perfectly flat surfaces.
2) Ensure glass thickness is at least 3mm.
3) For frameless glass, adhere WINBOT at least 10cm away from the edges.
9. Short press the Power button on the station to pause WINBOT immediately. Press it again to resume the cleaning task.
10. After cleaning, WINBOT will return to the start point and beep. Hold the handle tightly and long press the Start button for over 2 seconds, and follow the voice prompts to remove it.
2. Read the instruction manual and safety precautions carefully before use.
3. Open the water tank plug on top. Add ECOVACS WINBOT cleaning solution and close the plug tightly.
Tip: Monitor the liquid level to avoid overflow.
4. Open the station's back cover, take out the power cord, and plug it in. Long press the Power button for over 2 seconds to turn on the station and WINBOT.
Tip: If the blue light flashes, charge the WINBOT until the light stays solid before use.
5. Dampen the wiping pad and wring it out. Align the wide and narrow edges, attach it to the velcro, and press it flat.
6. For safety, secure the safety rope to a stable object. Lock the carabiner to prevent accidents.
7. Manually wipe a small area of the window larger than the WINBOT before adhering the unit.
8. Hold Start Button for 2 seconds.Once the fan starts, place WINBOT on the glass, and then automatically adsorb and start the cleaning.
Points to note:
1) WINBOT can only use on perfectly flat surfaces.
2) Ensure glass thickness is at least 3mm.
3) For frameless glass, adhere WINBOT at least 10cm away from the edges.
9. Short press the Power button on the station to pause WINBOT immediately. Press it again to resume the cleaning task.
10. After cleaning, WINBOT will return to the start point and beep. Hold the handle tightly and long press the Start button for over 2 seconds, and follow the voice prompts to remove it.