WINBOT Storage Guidance
Updated on 2026/07/20
1. Open the back cover of the station.
2. Face the WINBOT outward with the cable outlet pointing up. Hang the side of the wipping pad onto the hook at the back of the station.
3. Short press the Retraction button on the station to start cable recovery.
4. If the cable twists during retraction, straighten it manually and short press the button again to finish.
5. Unlock the carabiner, place the safety rope back, and close the back cover.
Note: Remove the wiping pad before storage. Ensure the pad is completely dry to prevent odors.
2. Face the WINBOT outward with the cable outlet pointing up. Hang the side of the wipping pad onto the hook at the back of the station.
3. Short press the Retraction button on the station to start cable recovery.
4. If the cable twists during retraction, straighten it manually and short press the button again to finish.
5. Unlock the carabiner, place the safety rope back, and close the back cover.
Note: Remove the wiping pad before storage. Ensure the pad is completely dry to prevent odors.