What can I do if the cleaning sink is full of dirty water, the voice prompts that the cleaning sink is full.
Updated on 2025/03/14
1.Open the dirty water tank, check whether there are obvious foreign objects on the seal ring. If so, please wipe and clean; if not, please close the cover tightly.
2.Take out the dirty water tank, remove sealing plugs to clean, then reinstall them, check that there are no foreign objects between the tank and the station, then put back the water tank and press it down; make sure the tank is in place.
3.See if the station is able to pump water properly.
4.If not, remove the mop washing tray, pour the water out, clean the filter and remove foreign matter in the suction port, then reinstall the detachable base.
5.Re-plug the station power switch and start self-cleaning to observe.
2.Take out the dirty water tank, remove sealing plugs to clean, then reinstall them, check that there are no foreign objects between the tank and the station, then put back the water tank and press it down; make sure the tank is in place.
3.See if the station is able to pump water properly.
4.If not, remove the mop washing tray, pour the water out, clean the filter and remove foreign matter in the suction port, then reinstall the detachable base.
5.Re-plug the station power switch and start self-cleaning to observe.