What can I do if the voice prompts that the cleaning sink is full?
Updated on 2024/10/22
1. Open the dirty water tank, check whether there are foreign objects on the sealing ring and if it is in place;
2. Check the dirty water tube is installed properly, then close the tank tightly; 3. Remove and clean the sealing plug, then reinstall it; check for no foreign objects between the tank and the station; put it back and press it down to ensure it is properly installed.
4. Long press the return button, observe whether the dirty water is drained; 5. If not,remove the detachable tray, pour the water out, clean the filter，then put back the detachable tray;
6.Disconnect and reconnect the power supply of the station. When the robot is docked and in charging mode, execute self-cleaning function again to see if it is normal.
2. Check the dirty water tube is installed properly, then close the tank tightly; 3. Remove and clean the sealing plug, then reinstall it; check for no foreign objects between the tank and the station; put it back and press it down to ensure it is properly installed.
4. Long press the return button, observe whether the dirty water is drained; 5. If not,remove the detachable tray, pour the water out, clean the filter，then put back the detachable tray;
6.Disconnect and reconnect the power supply of the station. When the robot is docked and in charging mode, execute self-cleaning function again to see if it is normal.