Auto-emptying failed, or dust bag not detcted or is full.
Updated on 2024/03/27
Fails to collect dust?
1. Make sure that the dust bag is fitted correctly and that the dust collection cabin is fully closed.
2. Make sure that DEEBOT is correctly placed on the station.
Dust Bag not detected?
1. Open the dust collection cabin and check whether there is a dust bag installed. If there is no dust bag, please install it correctly.
2. If there is a dust bag, remove it and re-install it again.
The robot continues to indicate that the dust bag is full after replacing with a new one.
1. Power off the robot and restart it. Disconnect the power of the station and then connect it again.
2. Check the firmware version of the robot, please update it to the latest version.
3. Make sure that the robot is charging. Re-install the dust bag.
1. Make sure that the dust bag is fitted correctly and that the dust collection cabin is fully closed.
2. Make sure that DEEBOT is correctly placed on the station.
Dust Bag not detected?
1. Open the dust collection cabin and check whether there is a dust bag installed. If there is no dust bag, please install it correctly.
2. If there is a dust bag, remove it and re-install it again.
The robot continues to indicate that the dust bag is full after replacing with a new one.
1. Power off the robot and restart it. Disconnect the power of the station and then connect it again.
2. Check the firmware version of the robot, please update it to the latest version.
3. Make sure that the robot is charging. Re-install the dust bag.