The robot creates a map, and it works normally at first. However, later on an overlay effect starts to appear (maps are overlaid onto each other, and the layers are misaligned). What can I do?
Bijgewerkt op 2021/04/02
1. Do not physically move the robot during cleaning, otherwise it will cause a relocation error that muddles the map.
2. If the map is overlaid, you can set DEEBOT to return to the charging dock to restore the map. After successfully restoring the map, the previously saved map will be displayed. If the map is still overlaid, you can go to Map Management and use the “Retrieve Map” function to retrieve the earlier map that was created successfully and continue using it, the current overlaid map will be deleted and your current timers and some map settings will be disabled. You will need to reset these.
2. If the map is overlaid, you can set DEEBOT to return to the charging dock to restore the map. After successfully restoring the map, the previously saved map will be displayed. If the map is still overlaid, you can go to Map Management and use the “Retrieve Map” function to retrieve the earlier map that was created successfully and continue using it, the current overlaid map will be deleted and your current timers and some map settings will be disabled. You will need to reset these.