How to use the reset button?
Updated on 2026/07/20
Kind Reminder：
If the WINBOT freezes or becomes unresponsive, you can perform a system reset:
1. In standby mode, flip the device over. Locate the small "RESET" hole on the back.
2. Use a pointed tool (like a toothpick) to press and hold the button. Release once the indicator light turns off.
3. Restart WINBOT by turning the power off and on. The reset is now complete.
If the WINBOT freezes or becomes unresponsive, you can perform a system reset:
1. In standby mode, flip the device over. Locate the small "RESET" hole on the back.
2. Use a pointed tool (like a toothpick) to press and hold the button. Release once the indicator light turns off.
3. Restart WINBOT by turning the power off and on. The reset is now complete.