How to correctly install the robot?

1.Please open the outer packaging box，take out the Robot, remove all the tapes on the station and inside the cleaning sink, remove the anti-collision protection strip, etc.;

2.Turn the Robot over.
3.Take out the side brush, align it with the slot, press it down. A "click" sound indicates that it has been installed properly.

4.Install the base, press both sides, the "click" sound heard indicates that the installation is in place;

5.Take out the power cord, connect it to the power socket on the back, turn on the power, and find a suitable position to place it against the wall.

(Please place the Robot on a flat, hard surface, without any objects within 5cm on both sides and 80cm in front of it.)

Warm Reminder：

Robot should be placed on ceramic tile floors as a priority. If you need to place them on wooden floor, please check the bottom of the Robot regularly for any water stains, and clean them promptly to prevent moisture damage.

Operation videos can be found under 'Tutorial Videos'.