Disassembly, cleaning and installation guide of V-shaped comb teeth
Updated on 2025/03/14
1.Please turn the robot over;
2.Press the two buckles towards the middle, remove the cover, take out the main brush;
3.Remove the V-shaped comb teeth, clean up after washing and drying(Tips: Can rinse it with water, please make sure to dry it after rinsing);
4.Reinstall the V-shaped comb teeth;
5.Reinstall the main brush, move the main brush to make sure it rotates smoothly.
6.Align the cover with the mounting slot, then press it down with a little force, when you hear the "click" sound, the installation is in place.
2.Press the two buckles towards the middle, remove the cover, take out the main brush;
3.Remove the V-shaped comb teeth, clean up after washing and drying(Tips: Can rinse it with water, please make sure to dry it after rinsing);
4.Reinstall the V-shaped comb teeth;
5.Reinstall the main brush, move the main brush to make sure it rotates smoothly.
6.Align the cover with the mounting slot, then press it down with a little force, when you hear the "click" sound, the installation is in place.