Disassembly, clean and installation guide of main brush
Updated on 2024/07/09
1.Long press the power button to turn off the Robot; Turn the Robot over;
2.Remove the brush cover and take out the main brush.
3.Clean the tangled material off the main brush.
4.Reinstall the main brush, and confirm that it can rotate smoothly.
5.Align the brush cover with the slot and install it. When you hear a "click", it indicates that it is properly installed.
2.Remove the brush cover and take out the main brush.
3.Clean the tangled material off the main brush.
4.Reinstall the main brush, and confirm that it can rotate smoothly.
5.Align the brush cover with the slot and install it. When you hear a "click", it indicates that it is properly installed.