How to correctly install the robot?
Updated on 2024/07/09
1.Please take out the Robot, Auto-Empty station,base, and remove protective strip.
2.Turn the Robot over.
3.Take out the side brush, align it with the slot, press it down. A "click" sound indicates it has been installed properly. 4.Connect Auto-Empty station with the base. 5.Find a suitable position to place it against the wall and plug in.
2.Turn the Robot over.
3.Take out the side brush, align it with the slot, press it down. A "click" sound indicates it has been installed properly. 4.Connect Auto-Empty station with the base. 5.Find a suitable position to place it against the wall and plug in.