Mapping Guide
Updated on 2024/07/09
1. Please open the door, remove any debris on the floor, and ensure there is sufficient light, so that the map can cover the entire living environment. 2.Make sure that vacuum module/reservoir without mopping pad plate is installed.
3.Long press the power button to power on the Robot, then place it directly in front of the docking station.
4. Press the return button to make it return for charging autonomously.
5. Please confirm that the Robot is connected to the network and online.
6. Open ECOVACS HOME > Enter Robot Controls> Quick Mapping.
7. After mapping is completed, the Robot will prompt "Mapping has completed, please check in the app." At this time, the map has been successfully created.
3.Long press the power button to power on the Robot, then place it directly in front of the docking station.
4. Press the return button to make it return for charging autonomously.
5. Please confirm that the Robot is connected to the network and online.
6. Open ECOVACS HOME > Enter Robot Controls> Quick Mapping.
7. After mapping is completed, the Robot will prompt "Mapping has completed, please check in the app." At this time, the map has been successfully created.