Disassembly, cleaning and installation guide of V-shaped comb teeth
Updated on 2025/02/07
1.Open the top cover, flip the power switch to "O", turn the robot over;
2.Press the two buckles towards the middle, remove the cover, take out the main brush;
3.Remove the V-shaped comb teeth to clean(Tips: Can rinse it with water, please make sure to dry it);
4.Reinstall the V-shaped comb teeth;
5.Reinstall the main brush, make sure it can rotate smoothly.
6.Align the cover with the mounting slot, then press it down with a little force, when you hear the "click" sound, the installation is in place.
2.Press the two buckles towards the middle, remove the cover, take out the main brush;
3.Remove the V-shaped comb teeth to clean(Tips: Can rinse it with water, please make sure to dry it);
4.Reinstall the V-shaped comb teeth;
5.Reinstall the main brush, make sure it can rotate smoothly.
6.Align the cover with the mounting slot, then press it down with a little force, when you hear the "click" sound, the installation is in place.