GOAT O800 RTK WHITE

Agile Sensing, Ultra-Smart, Optimal Coverage
Subscribe now to receive our Usage Guide that helps you learn more about how to use your DEEBOT! Also be the first one to know about our deals.
Subscribe now to receive our Usage Guide that helps you learn more about how to use your DEEBOT! Also be the first one to know about our deals.
111
How to deal with E644 Issues of GOATO series
Cleaning and Maintenance
Mapping Instructions
Mowing Operation
Mowing Preparation
Network Instruction
No entry Zone Setting
RTK Installation
Station Location and Installation
The station indicator light stays off.
The indicator light on the docking station keeps flashing blue.
Is the docking station waterproof?
Can the docking station be placed in a non-lawn area, such as under an awning or in a garage?
Can the docking station be relocated after it has been installed?
Do I have to nail down the docking station?
Does the docking station need to be paired with the GOAT?
Why can sounds be heard when GOAT is docking with station?
Why can't the GOAT find or be connected to the docking station correctly?
Why does the GOAT automatically return to the docking station when it is on standby?
Why can't the GOAT charge?
Why is the GOAT charging so slowly?
Why is GOAT shut down automatically when in the station?
Is the RTK station waterproof?
Why does the RTK station light flash?
What is the coverage of the RTK signal?
Will RTK base stations emit radiation?
Why the APP shows that the RTK station is not added during maping?
Where should the RTK station be installed?
Can I install the RTK station on the roof or other high places?
Can I change the location of RTK station?
Can I install the RTK station against the wall？
Can I install the RTK station in the plant?
Can I install the RTK station in an invisible hiding place?
Does the RTK station installed skew affect use?
Can I install RTK station in a narrow passage in my lawn?
If an RTK station is lost or broken, can GOAT still be used normally?
Can I still use GOAT if the RTK station is removed and not put back in original place?
I have installed the abnormal RTK station back in place according to the APP prompt, why the fault on the APP has not been removed?
Why is there a large area without signal shown through RTK signal quality map on the APP?
Can GOAT work if there is a large area without signal shown through RTK signal quality map on the APP?
Why is the mowing direction in some areas different from the setting?
Does the RTK station not upgrade or upgrade failure affect usage?
Should I map along the outline of the lawn or the garden?
How should I map when there is a road in my garden?
My front yard and backyard are not connected. How should I map them?
How should I map if there is a narrow aisle in my garden?
Can I create multiple maps for different areas?
My garden has a poor Wi-Fi signal. Will this affect mapping?
Can I remotely control the GOAT for mapping?
When can the mapping mode switch from remote control into auto mapping?
Can I not follow the machine when the GOAT auto mapping?
If the Bluetooth connection fails or you exit the App while controlling the GOAT/ mapping automactically, will mapping be affected?
Can I create a map in the evening or on a rainy day?
Can I control the GOAT to be close to the garden or lawn boundary all the way?
Can I remote control the map into any desired shape?
Why did the map setting fail?
Why is the outline position displayed on the App inconsistent with the actual one?
The generated map is not consistent with my actual remote control map, and part of the boundary is missing.
How many No-Entry zones can I create?
Where do I need to create No-Entry zones?
Can I create a restricted area anywhere?
Why am I unable to close a restricted area?
Can restriction zones be intersected or overlapped?
Can I create a linear no-go zone?
Why map learning is needed after controlling the GOAT to finish mapping?
Will grass be cut during map learning?
How long will the robot take to learn the map?
Can the GOAT be moved during map learning?
The GOAT returns to the charging dock before it has finished learning.
The GOAT stopped in its original location without completing its learning.
Learning is displayed as completed despite the GOAT only learning part of the map.
Why is the GOAT failing to return to charge after completing map learning?
The GOAT fails to return and recharge after map learning. Can I just move it back to the docking station?
Can I use the automatic mapping function if there is a road in my garden?
My front and back yards are not connected. Can I use the automatic mapping function?
Can I use the automatic mapping function if there is a narrow passage (covered with grass) in my garden?
Will the automatic mapping be affected if the Bluetooth is disconnected or the APP is exited during the automatic mapping process?
What factors in the environment will prevent automatic mapping?
Can I move the machine to a new lawn area and extend the map area?
Can a new mowing area overlaps with an existing mowing area?
How many channels can there be between each two zones?
Can the two paths cross?
Can the path on the map pass across a created lawn area during mapping?
When a new area is added, it overwrites the previously created path. Will the path be retained?
Can I draw the boundary as a curve when setting the multi-zone area?
Why doesn't the channel generate automatically on the map during mapping?
Why does APP remind me that the area is too large?
Why does my GOAT leave the map boundaries or enter the No-Entry zones?
Can the GOAT mow at night?
Can the GOAT be used in the rain?
Can the GOAT be used during cold winters?
Is there a limit on how long the GOAT can work?
Can the GOAT mow the area at the bottom of a trampoline?
Can the GOAT cut tall grass?
Will the blades of the GOAT continue turning when passing through non-grass areas?
How can I select the mowing efficiency for the GOAT?
Why is the GOAT moving in a chaotic route when mowing?
Why is the GOAT missing some areas when mowing?
Why is there a lot of grass left on the edges?
Why does the GOAT fail to reposition and trigger mowing after I move it?
When I manually start the GOAT, can the scheduler task continue?
Why does the robot often get stuck when mowing?
Why does the GOAT fail to resume mowing after I move it?
Why does the GOAT return to the docking station before mowing is complete?
Why does the GOAT not continue with the unfinished task after it has fully recharged?
Why does the GOAT remain in place without mowing?
Why does the GOAT automatically return to the docking station after I pause mowing on the app?
Why does the GOAT automatically end the mowing task when it is not complete?
Why does the GOAT not start mowing automatically at the scheduled time?
When using the schedule task function, what should I do if the grass has not been completely mowed by the end time, or the grass has been completely mowed before the end time is up?
Why is the mowing process in the schedule automatically cleared?
When setting a mowing schedule, the recommended time is not accurate?
Why is the GOAT not mowing exactly to the selected edges?
Is the GOAT more likely to get stuck when mowing along the edges?
When mowing in manual mode, the App always prompts that the distance does not meet the requirements and the blades cannot be turned on.
The work log show that the total mowing area is inconsistent with the sum value of the single mowing area?
There is currently no rain outside. Why did the GOAT trigger the rain protection mode?
There is currently no rain outside. Why is the rain protection mode still on?
I have adjusted the rain sensor delay time to start mowing immediately after the rain stops. Why is GOAT not working when there is no rain outside?
Why doesn‘t the GOAT return to the base station in rainy days? Is the rain sensor broken?
Why does the GOAT bump into some obstacles?
How do I turn on the AI recognition feature?
Can the GOAT recognize humans or small animals at night when AI recognition is enabled?
Why is the position and shape of an obstacle marked on the map different from real life?
The location of GOAT on the map is not the actual location.
Can the GOAT give alarms when it is in the docking station?
Why the real-time video feature unavailable？
I removed the GOAT from the map. Why didn't it trigger the alarm beyond the range of the map?
I lifted up my GOAT. Why did it not immediately lock and sound the alarm?
Can I change the PIN code after it has been set?
What should I do if I have forgotten the PIN code for my GOAT?
Does GOAT have any other smart triggers besides APP control?
Why can't the GOAT connect to the App even after completing network setup?
Why does the GOAT indicate that the machine is occupied during network setup?
Why can't I add a Wi-Fi network in multi-Wi-Fi management mode?
Is there a limit to the number of Wi-Fi networks that can be added?
How do I change winter and daylight saving time?
Why the GOAT cannot be connected to the network?
Why does the GOAT often prompt that its bumper is abnormal?
What type of battery does the GOAT use? How long does the battery last?
Why does the working time of the GOAT shorten after it has fully charged?
How long will GOAT's battery last when it is standby?
How long does the GOAT battery last in standby mode?
How do I restore the GOAT to default settings?
Can the firmware upgrade process be canceled midway?
Why does the firmware upgrade have a low speed or even fail?
Pressing the button on the display doesn't work after turning on the GOAT.
Will the garage affect the function of the GOAT?
Can I rinse the GOAT with a pressure washer?
Can I clean the GOAT with cleaning solution?
Do I need to move the docking station indoors in winter?
Do I need to move the RTK indoors in winter?
Do I need to move the GOAT indoors in winter?
Are GOAT blades universal blades?
What are the precautions before the first use when spring coming?
The GOAT cannot go through the narrow path.
The GOAT leaves some uncut areas in the narrow path.

Instruction Manuals

GOAT O800 O1200 RTK Instruction Manual_EMEA.pdf
download