How to install the robot?
Updated on 2022/06/01
1. Please open the packaging box, take out the robot, accessories and the station.
2. Take off DEEBOT's cover, remove the protective strips on the robot; Remove the protective things for the station.
3. Turn over the DEEBOT gently, attach the red and green side brushes to the slots accordingly.
4. Connect the station with the power supply. (The station should be placed on a flat ground, and keep an area 0.5m on either side and 1.5 m in front of the docking station clear of obstacles.)
Tips：
The station is preferred to be placed on the tile floor. If you place it on the wood floor, it is suggested to regularly check whether there is residual water at the bottom of the station. If so, please clean it in time to keep it dry.
2. Take off DEEBOT's cover, remove the protective strips on the robot; Remove the protective things for the station.
3. Turn over the DEEBOT gently, attach the red and green side brushes to the slots accordingly.
4. Connect the station with the power supply. (The station should be placed on a flat ground, and keep an area 0.5m on either side and 1.5 m in front of the docking station clear of obstacles.)
Tips：
The station is preferred to be placed on the tile floor. If you place it on the wood floor, it is suggested to regularly check whether there is residual water at the bottom of the station. If so, please clean it in time to keep it dry.